A quick way to solve offline Canon printer errors, paper jams, slow printing, or network problems is to reset your Canon printer. If you’re struggling with recurring error codes or want to move your device to another network, learning the correct way to reset Canon printer can be a time and hassle saver. A simple and straightforward guide is outlined below, which you can follow right at home.
Why Resetting Helps
A reset brings back the printer's internal settings, eliminates faulty configurations, and re-establishes the network connections. You can reach setup and troubleshooting resources at any time through ij.canon.start, the official site for printer setup.
Types of Canon Printer Resets
- Soft Reset
This is the most straightforward reset type.
- Switch off your printer.
- Remove the power cable.
- 30 seconds should elapse.
- Plug it in again and turn it on.
This refreshes the printer system without deleting settings.
- Network Reset
Use this when the Wi-Fi is not connecting.
- Access the Menu on the printer panel.
- Select Settings → Network Settings.
- Pick Reset Network Settings.
- After the reboot, reconnect the printer to Wi-Fi.
- Hard (Factory) Reset
This operation will bring your printer back to the original factory defaults.
- Hit Setup on the printer.
- Go to Device Settings.
- Push Reset Settings.
- Select Reset All or Factory Reset.
- Give your confirmation to the selection.
You will have to reconfigure the printer again with ij.canon.start after this process.
Additional Tips
- Always have your Wi-Fi password written down before carrying out network resets.
- Keep the firmware updated for better performance.
- If you change the router, do a network reset to re-establish the connection.
Final Tip
If you also deal with home security gadgets, remember that even basic resets can help them. For example, when you install the Ring camera, the reset of the device can solve the Wi-Fi or app connection problems. Similar reset rules apply—rebooting the system usually takes care of basic errors.
Resetting the Canon printer models and restoring the smooth printing performance can be done easily by following these steps. A quick reset usually brings your printer back to perfect working condition, whether you are troubleshooting or starting from scratch.